| Technology for manufacturing injection (artificial) marble. |
|
|
| Written by Alex Cherya | |
| Thursday, 09 December 2010 | |
|
Hello! Who are interested in technology of injection (artificial) of marble, is a video walkthrough article on casting, proportions, and a list of materials, as well as book pdf format.
Interisuet, write to
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
General information about the marble
BUSINESS PLAN
(Manufacture of molded marble)
1st stage
1.Rabochee place
-Space garage type with good ventilation
-Greasy radiator 600grn./2300rub.
-Table 1500h1000
-Glass 1500h1000h12 2pcs. 600grn./2300rub.
Textolite-strip (side of the matrix) 50grn./190rub.
-Storage (non-working fridge)
-Raspirator (respiratory protection) 350grn./1350rub.
250grn./960rub-extinguisher.
2.Oborudovanie
Milling Machine 200grn./770rub.
-Sander 150grn./575rub.
Polirovochaya-machine (you can "Bulgarian") 150grn./575rub.
-Drill with nasatkoy for a solution 150grn./575rub.
-Scale "medical" (from 1d) 50grn./190rub. without load
-Balance "bazaar" (up to 30kg) 30grn./115rub.
Total: 2580grn./9900rub.
2nd stage
Small Hardware (for Ukraine)
Ltd. C-A Ukraine
Kharkov, ul. Kalinina31
tel. 380 57 783-32-77 tel / fax: 380 57 783-32-73
Total: 700grn./2690rub.
3rd stage
-Frame under the table (legs) 90grn/sht./345rub.
-Plywood 130grn./500rub.
Scotch 5grn./20rub.
Total: 225grn./865grn.
TOTAL: 3500grn./13500rub.
The cost estimates only and depend on the availability of existing tools and the use of commonly available materials.
|