Home 
Technique Technique | Auto Infant car seat with the 'active' head
Technique Technique | Auto Infant car seat with the 'active' head
| Infant car seat with the 'active' head |
|
|
| Written by Борис Смирнов | |
| Thursday, 04 September 2008 | |
|
The text of the original in Russian Currently, a large number of a variety of children's automotive seats, which differ in configuration, type of attachment, adjustment, additional devices, etc. All of these chairs can be attributed to the category of 'fixed', because they are constantly occupied, or in the cabin, or a large space in the boot of the car. This could be their weakness. In addition, all these chairs do not provide protection to the child, the impact of the car behind. The need for a children's chair during the day time-limited, and all the rest of the time it can interfere with the transportation of persons or goods. It is desirable that the seat of their dimensions, occupies minimal space in the trunk of the car when it is not necessary. It must take shape along the fold between the elements, such as cardboard packaging, have low weight and to be convenient, for it is moved from the passenger compartment in the trunk and back. This should be done, by replacing udaropogloschayuschih materials that make up the design of chairs - air, and the consequent reduction in the cost of its value. The foundation will be the chair frame and air-bag. Upload chairs air is provided from the built-in case the compressor, connected to the mains via the cigarette lighter of car, or a light driver. It (cover), raspravlyayas, is the type of child car seat. This air cavity cover is divided into two parts. The first part - the head with the side 'petals', the second part -- seat with armrests and back with side 'petals'. The second cavity is connected to the first direct air through the valve. This valve opens when the back is a child of the impact of the car from behind, putting pressure on the second cavity and the air from it moves to the first cavity. This increase in volume toward the head of his own head, and side 'lobes', thus excluding' pletevye 'fluctuations in the head, reduces the load on the neck and back of the child. After using the chair, removed from the air. It is along the crease and put in the trunk of the car until the next case. The chair of such a design would provide a passive safety and will protect the child from injury during a car accident, a trip for him seem more than a short and pleasant, especially if the child seat to be installed in advance inclined to back the front passenger seat. |