From the description of the invention, it is clear that using them, in particular the invention - "lamp socket and 

 "Connector", can significantly reduce the complexity of connections (or replace) the light bulbs in the screen or 

   LED panels. This can substantially reduce the cost of production of your company. 

  In the vacuum tube invented the process of connecting the lamp holder - simply, without effort, the momentum of the extended sleeve cartridge before you contact the lower tubes on the lower contact of the holder. As a result, sleeve chuck tightly grasps cap lamp. Contacts cartridge tightly pressed to the contact tube. 

    Obviously, when you connect a large number of lamps, which I have to install a light panels, 

   simplify the connection will give a big economic impact. Besides the simplicity of this process enables it easy to mechanize or automate. That is because chuck clamps the lamp base with a guarantee of reliability contact clip cartridge to contacts lamp. 

    To remove the lamps in the invention of vacuum tube holder uses a system of levers. Such a system is useful for disconnecting a single lamp. For the simultaneous disconnection of a large number of efficient lamps 

   use a device similar to the system of open sockets, as described in the invention of "connector". The touch of a lever you can unplug all the lights on the panel. Moreover, such a system does not exclude the possibility of disconnection of each lamp on the panel, either individually or, in some improvements, can remove the legs selected series. 

    In the description of the invention is not disclosed how to install themselves rounds on the panel. Nevertheless, it is clear 

   that the attachment device can be very simple in design and easily installed on the panel. This is explained by the fact that the effort to install the lamp in the cartridge is much smaller than in conventional cartridges. Consequently, fewer and load on the mounting chuck, and requirements for its durability. Install a cartridge is as easy as, for example, the holder of the LED. 

   

 The above scheme of connecting and disconnecting the light bulbs on screens applied to the lamps with screw or bayonet cap. However, it is clear that, using these inventions can be developed similar schemes for lamps with pin and other plinths. 

 

 

1. Socket (RF patent RU 2343607 C1, the international application number PCT / RU 2008/000452, number 

 Published WO/2009/031929). 

 According to the principle of the invention resembles ZIF socket. 

   Contact nests present itself clamps, which are held in the open position of special slide. The slide is made in a box with bars passing between rows of sockets plates. The free ends of sockets in a clamp hinge plates slide into the slots, which allows the terminals located in the decompressed state and a free flow of a contact pins plug. Plug is inserted without effort until the end of the socket. At a time when all the contact pins immersed in the terminals, by pressing the shell 

   plugs on the button in the housing outlet slider is released from fixation and no longer hold the terminals, which automatically grip the contact pins. 

    The separation of electrical contacts and extracting the plug from the socket is at the touch of a lever that moves the slider until it locks. This slider opens the terminals, and plug without 

 effort is extracted from the socket. The free entry of contact pins in the terminals ensures the correctness 

mutual arrangement of connected elements. Actuation of the button clamp sockets guarantee full immersion in these contact pins and the absence of bias in the plug-in or plug. Willingness to work a connection is determined by ear, to release the lock click open. The proposed invention is distinguished by small parasitic mechanical loads, thus reducing the strength requirements as to the actual point of contact elements, and their fixation in housings connectable pairs. And it allows you to design sockets perform more demanding, which is directly dependent on the parasitic mechanical loads, such as - multicontact and miniaturization, low insertion force and dismemberment, as well as durability. 

     

2. Lamp cartridge (RF patent RU 2344526, WIPO application number PCT / RU 2008/000353, publication number WO/2009/025579). From the applied tube rounds invention differs relief connection or replace the faulty bulb, including broken glass bulb, reducing injuries, ensuring reliable contact with the bulb. Can be used for lamp socket for both screw and bayonet connection with the lamp socket. The principle of operation of the lamp holder is a logical development ZIF - connectors used in computers to install the processor - paste with zero effort. " Lamp 5 free with no effort 

   inserted into the cartridge tube 6. At the last moment, when you lower the contact nine lamps on the contact tube holder retainer 2 free clip cap lamp 1. Cap 7 is clamped cartridge 6, tightly clutching the second contact of the cartridge to the cap lamp 5. 

 

To retrieve the lamp from the lamp holder with a squeeze special levers 11, which will open the clip before activation of release 2. Then, without effort Remove old lamp and install new. In this case, both the contact holder will be pressed firmly with a given effort to contact the lamp by the elastic properties of the shell valve cartridge, which is not affected by temperature and electric current running lamps. This provides a set of technical advantages of the present invention of the modern lamp cartridges: easy to connect or replace a faulty electric light, including shattered glass bulb, reducing labor costs and injuries, reliable contact with the bulb. 

     

 Here is just a description of my other inventions that might interest you: 

    

3. Fiber-optic connector (RF patent RU 2345389, WIPO application number PCT / RU 2008/000579, publication number WO 2009/078748). From used fiber optic connectors to connect the groups of fiber optic cables between a different relief, connecting and disconnecting the connector, the possibility of installing optical fibers in optical fiber forks in the field, which eliminates the use of fiber optic networks 

 patch panels. Fiber Optic Connector operates as follows. Part centralizers from the ends of the hollow cylinder to the field connection lugs plugs are able to increase the size of the cavity. When you place a fork in the socket, all the tips freely, without effort, are centralizers, which are held cavity increased 

   Special slide. A full immersion in the tips intended for them of centering slider automatically shifted, allowing centering to reduce the size of the cavity to tip plugs, which ensures alignment of connected fibers. The shift of the slide provides a fixation plugs into an electrical outlet and release of the plug springy 

 elements engaged in clamping the ends of fibers with a normalized force (~ 10N). 

    To remove the plug from the outlet slider moves with the lever to its original position. It is compressed and fixed elastic elements plug, removed from the ends of stress fibers, open locks the plug increases the size of the cavities centering socket. Fork freely without effort is extracted from the socket. 

 

Plug-in connection (RF patent RU 2343608 C1, WIPO application number PCT / RU 2008/000451, publication number WO/2009/031928). The proposed plug-in allows you to easily remove the plug from the socket when 

   tension electric cable with a force higher than allowable, which may arise from accidental jerk the cord, and prevent the fall of man, or equipment, with negative consequences in the form of injuries, damage 

   equipment or electrical networks. Cable coupling works as follows. In a connected state (Fig. 1) fork 1 cord 2 is in the outlet 3. The cord 2 passes through the plug cord holder 4 lever 5 (holder can be made in the form of a slider on the lever that will adjust the allowable tension of the cord). Tensile 

   column 2 (Fig. 2) from a random spurt in the direction of the arrow on the lever 5 a force that allows the lever actuated ejector plug 6, which moves a plug from the socket 3. After extracting the fork 

 ejector lever 5 and 6 are returned to the starting position. 

    

 

Adredlya correspondence - Russian Federation 

 143913 Moscow Region, Balashikha, md. Dzerzhinsky, Building 33, 

 kv.70 .. Yuri Donets 

  Phone: 

  house. 7 495 524-66-21 

  slave. (Faks.) +7 495 650-51-56 

  Mobile: +7 903 627 38 84 

  E-mail: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it  

  You can also contact by mobile phone +7 926 726 83 64 with my son, Andrew Donetsk, who can talk to you in English. 

  Regards 

  Author inventions Donetsk Y.