Method of rapid pumping products Print E-mail
User Rating: / 0
PoorBest 
Written by Юлай Байчурин   
Saturday, 10 May 2008


Transferred via translate.google.com 
The text of the original in Russian moiidei.com
 
 Currently, Air Products inflated in such a way that all the air is included in the product through the pump. Much time is spent on filling the air of a large internal volume of the product with a minimum pressure difference between the external environment and internal volume of the product, especially in the initial stage of pumping. 

 The essence of my proposal: to the basic product shell 8 is mounted inside an additional shell 9 in a manner that space formed between them 4. When pumping the pump 1 of this space, the product takes the form, and the external air by gravity, bypassing the pump fills the bulk of the items 5 through the opening 6 with a valve 7. Once the product is filled with air, open the valve 17 on tube 20 and the inner volume of the product 5 podkachivayut before acquiring the product rigidity. As the amount of 4, many times less than 5, the method will significantly reduce the time pumping products. Additional casing, acting only at the time of pumping, can be made of a thinner and less durable material than the outer envelope, whereas the cost of products will increase slightly. Opening the valve 17 can be easily automated. 

 Polutorospalny mattress pump-frog inflated for approximately 30 minutes. That is, referring to a campaign or alloy for the night, half an hour, you should jump at the pump. I have personal experience of this holiday. A boat, usually on the alloy is pumped once. But if you left the morning fishing for a couple of hours, then you will be the same half hour of exercises. The method allows to save time and effort.



 
 

Add comment


Security code
Refresh