Power without fuel Print E-mail
User Rating: / 1
PoorBest 
Written by Þðèé Àëåêñàíäðîâè÷   
Ïÿòíèöà, 16 ßíâàðü 2009
Transferred via translate.google.com 


Modern civilization is impossible to imagine without a source of energy. Means of transport, the various production, lighting, heating and much more - all this requires energy 

Even people who are not very close to the technology world, it is well known - in recent years, even decades, many scientists, technicians increasingly looking for reliable, durable and, most importantly, safe and «clean», alternative sources of energy. Now the lion's share of energy are, basically, the basic burning of fossil fuels, but that light is, sooner or later burned to ashes. Sadly, for this purpose every year irretrievably spent many hundreds of millions of tons of fuel. Forming the ash is very difficult to recycle. For plants it is poison, so give a huge area cemeteries. Rain, wind, racing, these toxic wastes, which destroy all life. 
Moreover, the ash, a higher radioactivity. Soon it will just nowhere to go, and most of the more suitable for agricultural land will be destroyed. Clearly, this wait time, we can not. 
A much smaller proportion of the energy given to nuclear and hydroelectric, and quite negligible due to wind or natural heat. Needless to say once again - poisoned the environment, bear the person of the world (and we do not have a spare), takes the best of agricultural lands. Hydro and nuclear power are no better. The harm arising from them are not overstated. And the other energy sources - wind, tidal, solar, biogas, etc. Unfortunately, even today not seen seriously. Perhaps this is the case of future technology. But while all this is too expensive, low specific power output, with no way to get rid of the vagaries of climate, environment. 
And every year, mankind requires increasing amounts of energy - our appetites you can not even moderate. 
Yet, that is energy and where it is taken? Full and clear answer to that today can not give any one person. 
It can ill-poor only transfer energy from one species to another, but, remarkably, the total energy in the world is not changing. This is the law of conservation of energy. Translate energy from one species to another is easier in electrical devices, since this type of energy most commonly used and easily go to any other. 
To convert electrical energy into mechanical motors are widely used. It is believed that the devices that convert energy into mechanical motion, have the highest efficiency among all - more than 80-90 percent, but is this true? Let us look carefully how the electric motor. When the rotation of the rotor, according to Lenz law, the so-called winding íàâîäèòñÿ generator EDS, which is always directed toward the supply voltage. 
And EDS is very high. It is up to 95-98 per cent of the motor supply voltage. 
In other words, when the supply voltage motor 100 volts, at least 95 of them go to work to reduce useless power supply engine! Very curiously, it turns out that stress the engine is only 5 volts! And almost had to bring in 20 times more! Count the power consumed by the engine, while the true voltage and practically implemented. 
At current consumption 1A, the true power consumption is only 5 watts, and almost carried out - 100! This mechanical power is in the efficiency 80protsentov - 80 watts. That is, we have tremendous reserves to improve the efficiency of electric motors. 
And the efficiency, which is listed in all textbooks of Electrical Engineering, is questionable. Treat only useful converted value. When calculating the efficiency is only about 5 percent. Less than a locomotive. Actual value of the efficiency of electric cars do not relate directly proportional to their consumption and output. This issue is much more complicated and is waiting for its thorough investigation. Here, the parameters involved, which had never been taken into account. Obviously, many will say that this is a fantasy - to get more power than the stock is impossible. But it does not. There have been major theoretical studies, a number of experiments, which conclusively proved: it is not only possible, but it is very easy to reach! Today has developed dozens of options for electric motors and generators, with efficiency, which is ten times higher than used now. Of great importance in these works, played works of the late N. Gromov from Nizhny Novgorod. He is deeply «kopnul» this topic, published a set of solutions. Unfortunately, none of those who are directly charged with responsibility for not drawing attention to his works. His solutions have been too bold, and distinct from the well-known in electrical engineering, but it turned out that everything can be solved in the framework of the widely produced industrial designs of electric motors and generators. 
A general theory of constructing this class of devices, according to which, the engine of almost any type can be sverheffektivnym, and power will be able to generate energy, consuming only the part that needs it to cover the friction loss. In other words, generator, generating hundreds of kilowatts, will consume only a few kilowatts. 
This theory has already been practically confirmed by a group of experimenters from Bulgaria. They tested the model generator, the rotor is not hindered by connecting the load. In the most careful measurements are not able to notice an increase in consumption of mechanical power. 
With proper funding of these works, there would be an opportunity for several years to establish the main types of industrial electric generators and motors for all sectors of the economy, transportation. 
Start to produce individual units to individuals, to produce electric vehicles with batteries that do not require any recharging stations, but have unlimited range. All types of vessels, many types of aircraft, even space ships (do not be surprised, already have to develop drivers for them) can be built on the proposed new principles. That's a really looks fantastic (but still - this is feasible) .. 
  The next stage - gradually remove dilapidated power plants, power plants, hydroelectric power station. And for several decades, will be smooth and painless transition to the new energy. Developed and tested a new vortex generators of electricity and heat, working at normal water. Imagine being the combustion of ordinary water. 
When cost of energy only a few watts, the power generated plume, hundreds of watts, a temperature of about 8000 degrees. 
Almost all the proposed methods are simple, accessible, which may be achievable without significant cost and expensive equipment. The materials most commonly needed. Special technology is not required. If the money spent on humanity myth fusion energy (remember, what it has), proposed to spend on energy, the entire planet will be an abundance of energy. Will have to clean and the environment from the waste of energy is now archaic. 
The authors, on the basis of the already developed a realistic concept of the electric motor, consuming many times less electrical power than developing them mechanical. Everything is in full accordance with the known laws of physics and the laws of conservation of energy. 
While the rotor motor motionless, taking stock of the voltage creates a current in the coils magnetization, which provides the power and the interaction force to rotate the rotor. The strength of the magnetic field coils depends only on the current in them and the number of turns of winding wires. Therefore, when a stationary rotor correct amperage is achieved when a small voltage. It depends mainly on the resistance of windings. A motor power consumption equal to the product consumed direct current to supply voltage. But when the rotor is in rotation, in its coils starts generated EMF, which is always directed toward the supply voltage, compensating for it. Therefore, in order to maintain the desired amperage have to raise the supply voltage. This growing power consumption. In practice, almost all the consumed electric power goes to overcoming the generator EMF. 
And only a very small part is used strictly for work. The author managed to find a theoretically and empirically confirm this interaction of magnetic fields in the engine, where the generator EMF is necessary to raise the supply voltage electric motor. Consequently, there is an opportunity many times to reduce electrical power consumption of the engine, with constant mechanical output. 
Taking in the approximate calculation of the average electric and magnetic parameters laid down in the motor, turned out that the ratio of output mechanical power to electrical consumption will be approximately 40 to 1. And these figures can be significantly improved. We developed many projects sketch engines, which may receive more orders for mechanical power spent on electrical. All of them are extremely simple manner, do not require scarce materials, as widely advertised, and has already sold abroad and in Russia LYUTEK type engines, PERENDEV and others. In doing so, they are cheaper and their connections. 
Of course, you want to conduct serious research on the proposed technical solutions to all these motors. Manufacturer prototypes, test them. The technology of manufacturing. To hold patents, including international. At the creation of a prototype motor, the patenting, licensing and more. Frighteningly, that all this would require at least an estimated one million euros a year and costs over time. 
But the subsequent profits will far exceed the costs. These motors can be the basis of any means of transport. Drive generators in power plants. (and some variants of electric motors themselves can generate additional electricity), machinery, equipment and other. Note that this does not require any fuel at all! All the energy is taken from the internal structure of ferromagnetic - (electric iron), of which the electric motors. 
To prove this, one simple example: take the roll of conventional copper wire and bring it to a certain current. Measurements of the magnetic field created by a coil. After that, we introduce an iron core coil. The magnetic field will increase many times. In constant current in the coil! This process happens in any electromagnetic device. And if you get rid of hindering reverse EMF, and then we get a win in the production work on the cost. So that the proposed construction of electric motors is nothing fantastic and unreal. Moreover, such engines have been known to have about 150 years ago. So, poraduemsya, humanity does not threaten the energy hunger. All will depend only on ourselves: will the new energy, begin to develop it - civilization will survive and prosper. And we will rely on old, costly energy - it is not an end in sight.  
 

Add comment


Security code
Refresh